Microscope Stage Incubators and CO2 Controller

 

 

Microscope Stage Incubator

 

The Microscope Stage Incubator is a special heating equipment to use it on any inverted microscopes! This equipment is independent of either the microscope, or the microscope stage! The shape of the basement of the Microscope Stage Incubator is equivalent to the standard 6 to 96 Well Plates (in other words microtitre plates). This feature gives the opportunity to use it on any manual, or motorized microscope stages. Only a fixing adaptor for the standard 6 to 96 Well Plates should be ordered from the manufacturer of your microscope stage.

 

                Click on the picture to get it in full size

 

 

Technical data:

 

Target holder: Petri-dish, 35 mm in diameter, with cover slip bottom

 

The controlled temperature range: room temperature to 50 Centigrade, in 1 Centigrade steps

 

The resolution of the measurement: 0.1 Centigrade

 

Histheresis (approximately): 0.2 - 0.3 Centigrade. The actual histheresis depens on the thermal capacity, and the volume of the solution in the Petri-dish.

 

To use the Microscope Stage Incubator you should buy a Physiological - Biological Temperature Controller, assembled with 12V FINE DC power end-stage.

 

 

Microscope Slide Heater

 

The Microscope Slide Heater a special heating equipment to use it on any microscopes! This equipment is independent of either the microscope, or the microscope stage! The shape of the basement of the Microscope Slide Heater is equivalent to the standard 6 to 96 Well Plates (in other words microtitre plates). This feature gives the opportunity to use it on any manual, or motorized microscope stages. Only a fixing adaptor for the standard 6 to 96 Well Plates should be ordered from the manufacturer of your microscope stage.

 

Microscope Slide Heater equipment is currently under technological development and redesign process. Its technical data will not be changed. The new pictures will be published soon. For any more or detailed information please call or email us.

 

 

Technical data:

 

Target holder: standard microscope slides

    25.4 x 76.2 mm (1 inch x 3 inch) or

    25 x 76 mm

    Our Microscope Slide Heater can accept either of them.

 

The controlled temperature range: room temperature to 50 Centigrade, in 1 Centigrade steps

 

The resolution of the measurement: 0.1 Centigrade

 

Histheresis (approximately): 0.3 - 0.5 Centigrade.

 

To use the Microscope Slide Heater you should buy a Physiological - Biological Temperature Controller, assembled with 12V FINE DC power end-stage.

 

 

CO2 Controller

 

The CO2 Controller equipment can be ordered for the Microscope Stage Incubator as an option.

 

            Click on the picture to get it in full size

 

 

Technical data:

 

The controlled CO2 concentration range: 0 % to 20 % (Volume)

 

The resolution of the measurement: 0.01 %

 

Histheresis (approximately): 0.3 - 0.5 %. The actual histheresis depens on the actual air-mixture consumption.

 

Display: 4 characters green LED display

 

Buffer volume of the internal mixer tank: 5 dm3

 

Output volume flow: 0 to 1 dm3 / min

 

Programming: three pushbuttons on the front

 

Automatic internal diagnostic algorithm in the software

 

Flash program memory

 

Non-volatile EEPROM memory to store the parameters used last time

 

Dimensions of the instrument: 460 x 420 x 180 mm

 

Weight: 15 kg