Engineering Creativity for Neuroscience

PRODUCTS       CONTACT       PRICE LIST       DOWNLOADS       WHO ARE YOU       OUR PROFILE       MUSEUM       HOME

 

Price List        (last modification: 21 October, 2018)

 

Some of the product description pages contain the prices of the equipments described over there. On this Price List page you can find the prices of the rest of the equipments. The sequence of the paragraphs in this long text file is the same as the sequence of the product groups on the Products page.

 

 

General Conditions

 

Supertech Instruments gives you 3 years of full warranty by default. For electronic products the warranty period can be 5 years and even longer in exceptional cases (according to special discussions).

 

Supertech Instruments gives you full warranty for its products against defects in materials or workmanship as long as the equipment has been subjected to normal and proper use. During the warranty period, faulty products will be repaired or replaced free of charge provided they are returned to our workshop. Postage of the warranty repair actions is paid by the Customer. There are special conditions introduced for repairing of Vibration Isolation Tables (see below).

 

Supertech Instruments will undertake the servicing and calibration after the expiration of the warranty period for a nominal fee.

 

The warranty does not cover the faults made by the user.

 

If the installation was not carried out on a workmanlike manner, the warranty ceases. We provide many resources to help you to install the product correctly: user manual, installation manual, repair manual, free helpdesk on the phone and in email. With this background the workmanlike installation is easy. However if you are not sure you can do it, you can involve our product specialist.

 

The exceptions of warranty are:

- Dual-Superfusion Slice Chamber and its parts

- Assembled 8 x 8 mm 3D sensor PCB, with acceleration sensor IC of the 3D Accelerometer

- Batteries and rechargeable batteries built in or enclosed to the equipments

These are consumable products, reasonably expected to be used up or damaged during use. These are warranted only against defects in workmanship or materials that prevent their use.

 

Warranty limitation of the In-line Solution Heaters: The warranty is valid for the In-line Solution Heaters except for the faults made by the user, such as: broken stainless steel tube, bent tube, stoppage in the tube, dirt in the tube, infection in the tube, corrosion in the electronic heater or sensor circuit, broken wire.

 

Warranty conditions of STable (©) Active Pneumatic Vibration Isolation Tables are slightly special because of their huge weight and inability of transportation. The details are published in the User Manual of Active Pneumatic Vibration Isolation Tables.

 

All products of Supertech Instruments have got CE identifier and certificate.

 

The prices published in this price list are end user prices, except in the section of Vibration Isolation Tables, Optical Tables and Damping Plates. Vibration isolation products are nearly always ordered by reseller partners. This is the reason, eliminating the need of calculations, why that section is written in reseller prices.

 

The prices listed below are NET prices (excluding VAT). For international transactions the VAT should not be paid to Supertech Instruments.

 

Shipping fee is not included in the price of the equipments.

 

Our prices are extremely stable (usually for years). We update some items very rarely.

 

Outside the European Union the local customs duties and may be VAT or other taxes (depending on the laws of your country) must be paid, not for Supertech Instruments, but for the appropriate local offices.

 

Shipping fee discount for our customers who are located close to our factory in the neighboring EU countries: shipment is FREE in whole

    Austria

    Hungary

 

Shipping fee discount in those cities where Supertech Instruments has an office: FREE shipment of the electronic equipments (vibration isolation tables are excluded) in

    London, UK

    Zurich, CH

 

Default payment method is prepayment. The exceptions are:

- For old, well-known customers of Supertech Instruments we apply the method of payment after delivery.

- For higher amounts we can agree special payment methods (e.g. partial prepayment and the rest after delivery, etc.).

- In special cases (e.g. if prepayment is not allowed at your Institute) we can agree the method of payment after delivery.

 

For international transport we use the services of specialized, professional shipping firms. We always offer that firm, which has the smallest "transport injury rate" according to our experiences in the target country.

 

Discount for higher quantities:

    1 - 9 pieces: list prices, see below

    10 - 99 pieces: 12 % discount

    100 - 999 pieces: 24 % discount

    1000 - to more pieces: 36 % discount

 

During the continuous development process the internal constructions and the technical parameters of our products are frequently improved. According to the development phases the version numbers of the equipments are sometimes changed without prior notice, but these changes usually have no effect for the prices. The prices of Supertech Instruments are very stable, usually they are valid for years. The former prices are always valid for the newest versions in cases of technical developments.

 

In most cases you can ask minor modifications and customizations on the products according to your special requirements. Usually we carry out the small modifications for free. To discuss your desires, our technical possibilities and conditions, please contact us.

 

 

Temperature Management in Physiology and in Biology

 

Physiological - Biological Temperature Controller (heater-only version) TMP-5b: 780 EUR

 

2-channel Physiological - Biological Temperature Controller (heater-only version) TMP-5c-twin with independent controllers and 12V FINE DC end-stages: 1300 EUR

 

*NOT available at the moment: Physiological - Biological Temperature Controller (cooler-heater version) TMP-6a: 1090 EUR

 

Standard size heating pads for small animals, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller). Unit price is: 80 EUR / dm2. The actual choice of the standard size heating pads:

 

Heating pads with stainless steel top plate for small animals, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller):

- 115 x 80 mm: 74 EUR

- 170 x 115 mm: 156 EUR

- 330 x 145 mm: 382 EUR

 

SMALL SIZED (smaller than 5 dm2) CUSTOM Size Heating Pad for small animals, with built-in digital DS1820 temperature sensor (compatible with the 12V or with the 24V Physiological - Biological Temperature Controller). Their thickness is 12 mm or more by default, depending on the actual size, excluding the small rubber feet. Smaller thicknesses should be discussed before placing an order: 160 EUR / dm2

 

LARGE SIZED (larger than 5 dm2) CUSTOM Size Heating Pad for small animals, with built-in digital DS1820 temperature sensor (compatible with the 12V or with the 24V Physiological - Biological Temperature Controller). Their thickness is 12 mm or more by default, depending on the actual size, excluding the small rubber feet: 80 EUR / dm2

 

SPECIAL OFFER! Design work of unique, custom size heating pads for small animals according to your specification and requirements: FREE

 

Flat heating plate for stage of microscopes, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller). Unit price, independent of the size: 370 EUR

 

SPECIAL OFFER! Design work of unique heatable plate for stage of microscopes according to your specification and requirements: FREE

 

*NOT available at the moment: Heating pad for Mouse and Small Rat Stereotaxic Adaptor, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller): see below at the Mouse and Small Rat Stereotaxic Frame Adaptor.

 

*NOT available at the moment: Combined Heater (100 mm in outer diameter) for the brain slice chamber and to heat the solution flow, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller): 400 EUR

 

*NOT available at the moment: Modified heating arrangement with bipolar transistor based active heating elements for Luigs & Neumann patch clamp chamber holder, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller): 130 EUR

 

Precision Biological Temperature Meter BTM-4a, compatible with any Pt100 temperature sensors (including the Pt100 Transducer Box): 350 EUR

 

Pt100 temperature sensor with epoxy coating and 0.5 m cable: 35 EUR

 

Pt100 temperature sensor with stainless steel coating and 0.5 m cable: 110 EUR

 

Replacement Pt100 Transducer Box: 135 EUR

 

External digital DS1820 temperature sensor, compatible with the Physiological - Biological Temperature Controller, 4.5 mm in diameter, with 1.5 m coaxial cable and BNC plug: 40 EUR

 

Jet Air Heater System for Objective (it is a set of the following equipments):

- Jet Air Flow Controller with built-in temperature meter: 1230 EUR

- Nosepiece for the Objective, with built-in digital DS1820 temperature sensor (compatible with the 12V Physiological - Biological Temperature Controller): 740 EUR

- To operate the Jet Air Heater System a 12V Physiological - Biological Temperature Controller is needed. For its price, see above.

 

Industrial High Temperature Controller, 230 V AC output, up to 500 Centigrade (1.0 C resolution), measurement is based on Pt100 temperature sensor (including the Pt100 Transducer Box): 740 EUR

 

Heating Plates for high temperature industrial purposes (up to 500 Centigrade):

- 300 mm in diameter, 1 kW, 230 V AC: 280 EUR

- 300 x 300 mm, 2.5 kW, 230 V AC: 470 EUR

- 300 x 300 mm, 4.0 kW, 230 V AC: 580 EUR

- 420 x 300 mm, 1.8 kW, 230 V AC, high pressure version: 1040 EUR

 

 

Vibration Isolation Tables, Optical Tables and Damping Plates

 

All other prices published by Supertech Instruments are end user prices. This Vibration Isolation section is an exception. Vibration isolation products are nearly always ordered by reseller partners. This is the reason, eliminating the need of calculations, why this section is written in reseller prices.

 

The smallest size of Active Pneumatic Vibration Isolation Table what we manufacture is 66 x 66 cm. You can order any size of table equal to or bigger than the smallest one. Custom size of table does not mean harder price, only longer (nominally 60 days) manufacturing time is necessary, because they are not on stock as the frequently manufactured models.

 

Small_Table_Price_3.xls : Calculator sheet to get the price of a given, Small sized STable (©) Active Pneumatic Vibration Isolation Table, with default top plate structure

 

Large_Table_Price_1.xls : Calculator sheet to get the price of a given, Large sized STable (©) Active Pneumatic Vibration Isolation Table, with default top plate structure

 

Custom size of Active Pneumatic Vibration Isolation Table:

- Small Leg System (independently of its size, till 4 kN load): 1810 EUR

- Large Leg System (independently of its size, till 8 kN load): 2430 EUR

- Price of a top plate: it is proportional to the surface area of the top plate. Unit prices for calculations:

    17.10 EUR / dm2 for the default top plate structure

    43.40 EUR / dm2 for the fully stainless steel top plate structure

- The price of a Vibration Isolation Table consists of the fixed price of the leg system and the area-proportional price of the top plate. The options are additional price components.

 

Manufacturing size-surcharge for tables bigger than 1800 x 1490 mm: 1200 EUR

 

Usually we keep the most popular, frequently manufactured models in stock for fast delivery. All of them are Active Pneumatic Vibration Isolation Tables. Examples of these sizes (with default top plates, without "optical" hole pattern, without Quiet Air Compressor and without optional accessories):

    980 x 660 mm table: 2916 EUR

    1100 x 800 mm table: 3314 EUR

    1220 x 760 mm table: 3395 EUR

    1500 x 980 mm table: 4323 EUR

    1800 x 1490 mm table: 7016 EUR

    1800 x 1800 mm table (with manufacturing size-surcharge): 7970 + 1200 = 9170 EUR

 

IVF Table 980 x 660 mm with elastomer-based vibration isolators: 2770 EUR

IVF Table 980 x 660 mm with active pneumatic vibration isolators: 3630 EUR

 

Parts of the IVF Table:

    Leg system with elastomeric vibration isolators: 950 EUR

    Leg system with active pneumatic vibration isolators: 1810 EUR

    Smooth stainless steel covered top plate 980 x 660 mm: 950 EUR

    Additional stainless steel arm rest to the rear side: 160 EUR

    2 pieces (left and right) stainless steel shelves with plexiglas cover: 710 EUR

 

Quiet Air Compressor: 540 EUR

 

By default there are metric M6 holes drilled on the top plate in 100 x 100 mm pattern, for FREE

 

One special shaped, even big hole (e.g. for camera built to the bottom or base port of the microscope) on the top plate, according to your specification and/or drawing, if it is ordered before starting the manufacturing process: FREE

 

"Optical" hole pattern (M6 threaded holes in 25 x 25 mm pattern) on the top plate: 4 EUR / dm2

 

"Optical" breadboard (40 mm thick base plate with M6 threaded holes on it, in 25 x 25 mm pattern). We manufacture any user-defined size of breadboard: 6 EUR / dm2

 

Set of Casters (wheels), 4 pieces, fixed version. It can be ordered only for new tables in the manufacturing phase: 240 EUR

 

Set of Casters (wheels), 4 pieces, removable version. They can be assembled onto the leg system any time, even on older tables: 380 EUR

 

Additional arm rest with holder rod set and screws to the back, left or right side of the table (the front arm rest is a basic, free accessory). The length of the second arm rest and the required (may be unique) measure of the holder rods should be specified in the order: 270 EUR

 

One piece of side shelf lain on the two arm rests, made of stainless steel or polished wood. The width of the shelf and its material should be specified in the order: 140 EUR

 

Stainless steel cover for the arm rest. If it is ordered before shipping the table (in other words if the table is assembled with stainless steel covered arm rest instead of wooden arm rest), then it is free. If the stainless steel cover is ordered later as an additional part, it costs: 80 EUR

 

Vertical Spinning Disk Adaptor for 122 x 76 cm table: 1830 EUR

 

Magnetic Adapter Plate to fix magnetic stands on the stainless steel covered top plates: 48 EUR

 

Variable shelf system to the back side of the 98 cm wide tables, with three pieces of 90 x 25 cm shelves: 430 EUR

 

Set of Remanufactured Working Cylinders, 4 pieces, for the purpose of repair. They are used to replace all the working cylinders together, in the case of injury or blown-up membrane. They can be ordered only by our previous customers, if we get the worn-out pieces back: 490 EUR

 

One piece of complete Valve Assembly, for the purpose of repair, only for previous customers, if we get the worn-out piece back: 190 EUR

 

Price of a Double-Storied (dual layer) Top Plate is the sum of the following price elements:

4 pieces of height adjustable legs (independently of their size): 720 EUR

"Optical" breadboard: its price depends on its size, see above

Design of the height adjustable legs according to your unique specification: FREE

Its dimensions, such as the height range of its four legs and the desired size of the "Optical" breadboard should be specified in the order.

 

Big-load Elastomer Vibration Isolator Cone Unit (1 piece) with steel fixing elements (400 - 500 N mass load / unit, design height: 110 to 130 mm, M16 male thread connector at the bottom side, 120 mm in diameter): 160 EUR / unit

 

Small-load Elastomer Vibration Isolator Cone Unit (1 piece) with steel fixing elements (120 - 150 N mass load / unit, design height: 60 mm): 110 EUR / unit

 

Elastomer-based Damping Plate for microscopes, universal, 60 x 40 cm: 910 EUR

 

Elastomer-based Damping Plate for microscopes, universal, 75 x 50 cm: 1560 EUR

 

Upgradeable (into active pneumatic in the future) leg system for Elastomeric Isolation Tables: 950 EUR (if you buy this leg system you will need the same top plate, what is manufactured for the Active Pneumatic Vibration Isolation Tables, see above).

 

Upgrade to active pneumatic version from formerly installed Elastomeric Isolation Tables (if we get the Elastomer Set back): 1400 EUR

 

Faraday-cage (2-door version, standing on its own feet, covered with perforated steel plates, for 98 x 66 cm table): 1220 EUR

The price of the Faraday-cage is proportional to the surface of the table manufactured for.

 

Tool Set for Installing STable (©) Active Pneumatic Vibration Isolation Tables: 170 EUR

We provide the first Tool Set for FREE, shipped with the first Table to every new reseller or customer.

 

One year of Extended Warranty after the default 3 years for a STable (©) Active Pneumatic Vibration Isolation Table (with Standard conditions): 827 EUR / year

For the conditions and agreement, please email us.

 

Renewal of the leg system of a STable (©) Active Pneumatic Vibration Isolation Table: 1214 EUR

- This price is the sum of the following price elements: one set (4 pieces) of Remanufactured Working Cylinders, three pieces of complete Valve Assemblies, 6 working hours of a repair engineer, and we provide the complete tubing for free.

- The renewal action restarts the 3 years of full warranty.

- During the renewal we do not work on the top plate, we leave it intact with the microscope system built on it.

- An additional traveling cost (in case of on-site renewal) or shipping fee of the leg system to our workshop and back might be applied (it is a topic of particular consideration in every case).

 

Shipping fee of the vibration isolation table, if it is transported by an independent, specialized lorry firm, on pallet:

- It is the default shipping method, cheap, fast and secure.

- For the availability to your target location and current price given by our partner firm, please email us.

 

We do not apply a shipping fee in those countries, where we offer free shipment (see the current list of the involved countries above).

 

The shipment means the insured shipping action up to the required location. The product is crated and shipped on pallet. Shipment does not include installation. We provide a detailed installation guide for every product. The installation does not need any special knowledge or practice.

 

For unique requests we offer on-site installation service. The planned installation date should be discussed at least 5 weeks in advance; otherwise it can not be guaranteed due to potential conflicts in said third parties' scheduling.

 

Shipping of the vibration isolation table in the European Union, including complete installation. On this service Supertech Instruments does NOT want to earn any profit, we just invoice our real expenses:

- Since our factory is located in Hungary, the part of the trip in Hungary is free. The distance is calculated from the Hungarian border to the target location and the same distance in backward direction to the Hungarian border. Unit price of transportation is 0.386 EUR / km. This transportation fee is merely calculated from the price of fuel and the amortization rate of our vehicle and does not include any extra cost or profit.

- We provide a practiced service engineer as a driver. He can install the table fluently, he is not a simple driver. Alternately, our service engineer can travel by plane while the table is shipped on pallet.

- Moving specialists: for maximum safety third-party experts are contracted for heavy lifting during the installation process.

- Additionally, accommodation fee for our product specialist will be applied, if the distance from the Hungarian border is too long to travel there and back in one day (it is a particular consideration in every case).

 

 

In-line Solution Heaters

 

Single-channel In-line Solution Heater (one heated tube) without lockable magnetic fixing stand (compatible with the 12V Physiological - Biological Temperature Controller): 340 EUR

 

Dual-channel In-line Solution Heater (two independent tubes in one equipment) without lockable magnetic fixing stand (compatible with the 12V Physiological - Biological Temperature Controller): 480 EUR

 

Replacement Single-channel In-line Solution Heater (for the case of injury, internal dirt or infection) without stand, only for previous customers, if we get the worn-out piece back: 300 EUR

 

Replacement Dual-channel In-line Solution Heater (for the case of injury, internal dirt or infection) without stand, only for previous customers, if we get the worn-out piece back: 430 EUR

 

Lockable Magnetic Fixing Stand, 800 N force: see below at the Precision Mechanical Devices section.

 

Physiological - Biological Temperature Controller, up to 50 Centigrade (0.1 C resolution): see above at the Temperature Management in Physiology and in Biology section.

 

 

Microscope Stage Incubators and CO2 Controller

 

Stage Incubator for 35 mm Petri dish (compatible with the 12V Physiological - Biological Temperature Controller). The shape of its basement is equivalent to the standard 6 to 96 Well Plates (in other words microtitre plates): 950 EUR

 

*NOT available at the moment: Stage Incubator for Lab-Tek II Chambered Coverglass Micro Plate (compatible with the Jet Air Heater System). The shape of its basement is equivalent to the standard 6 to 96 Well Plates (in other words microtitre plates): 860 EUR

 

CO2 Controller equipment for Stage Incubators: 2800 EUR

 

Carbogene Gas Conditioner Unit and a high pressure regulator together to use a premix bottle (excluding the bottle): 360 EUR

 

Evaporator bottle: 135 EUR

 

*NOT available at the moment: Gas Heater for Carbogene up to 25 ml/min of flow rate (compatible with the 12V Physiological - Biological Temperature Controller): 470 EUR

 

*NOT available at the moment: Gas flow meter tube: 310 EUR

 

Physiological - Biological Temperature Controller, up to 50 Centigrade (0.1 C resolution): see above at the Temperature Management in Physiology and in Biology section.

 

Warm Air Jet Heater System for Incubator, Objective or Sample: see above at the Temperature Management in Physiology and in Biology section.

 

 

MultiAmp V.3 Multichannel Amplifier System for Biology

 

8-channel MultiAmp amplifier unit with built-in microcontroller, without Power Supply: 1900 EUR

 

16-channel MultiAmp amplifier unit with 2 pieces of built-in microcontrollers, without Power Supply: 3800 EUR

 

Power Supply unit capable to supply up to 64 amplifier channels: 800 EUR

 

Examples according to the modularity:

    8-channel system: 1900+800=2700 EUR

    16-channel system: 3800+800=4600 EUR

    24-channel system: 3800+1900+800=6500 EUR

    32-channel system: 2x3800+800=8400 EUR

    48-channel system: 3x3800+800=12200 EUR

    64-channel system: 4x3800+800=16000 EUR

    128-channel system: 8x3800+2x800=32000 EUR

 

8-channel Monopolar (single-ended) headstage for MultiAmp: 140 EUR (17.5 EUR/channel)

 

8-channel Differential headstage for MultiAmp: 330 EUR (41.3 EUR/channel)

 

The first set of Monopolar (single-ended) headstages in the same number as the number of the channels in the main amplifier system: FREE starting accessories.

 

Monopolar (single-ended) ground-referenced interface between the 8-channel HST/8o50-G20 (Rev.3) headstage and MultiAmp: 290 EUR

 

Monopolar (single-ended) ground-referenced interface between the 16-channel HST/8o50-G20 (Rev.3) headstage and MultiAmp: 380 EUR

 

8-channel external Low Pass Filter Box with user-defined bandwidth setting for MultiAmp: 180 EUR

 

 

BioAmp V.6 Universal Amplifiers for Biology

 

The prices of the different multi-channel BioAmp equipments are calculated according to the following algorithm. If the number of the channels in the system is increased according to the powers of 2, the price concerning one channel (the total price divided by the number of the channels) is always reduced by 16 %.

    1-channel equipment: 1000 EUR (1000 EUR / channel)

    2-channel equipment: 1680 EUR (840 EUR / channel)

    4-channel equipment: 2820 EUR (705 EUR / channel)

    8-channel equipment: 4736 EUR (592 EUR / channel)

    16-channel equipment: 7952 EUR (497 EUR / channel)

 

Monopolar (single-ended) preamps in small metal box:

    1-channel Monopolar preamp for BioAmp: 96 EUR (96 EUR / channel)

    2-channel Monopolar preamp for BioAmp: 162 EUR (81 EUR / channel)

    4-channel Monopolar preamp for BioAmp: 272 EUR (68 EUR / channel)

 

Differential (instrumentation) preamps in small metal box:

    1-channel Differential preamp for BioAmp: 122 EUR (122 EUR / channel)

    2-channel Differential preamp for BioAmp: 204 EUR (102 EUR / channel)

    4-channel Differential preamp for BioAmp: 344 EUR (86 EUR / channel)

 

1-channel Preamplifiers (headstages) in cylindrical enclosure able to be moved by micromanipulators:

    1-channel Monopolar (single-ended) headstage for BioAmp in small stainless steel enclosure: 140 EUR

    1-channel Differential headstage for BioAmp in small stainless steel enclosure: 170 EUR

 

The first set of Monopolar (single-ended) headstages in the same number as the number of the channels in the main amplifier system: FREE starting accessories.

 

Patient safety isolator module for BioAmp, with built-in floating power supply, 0 to 20 kHz, 2500 V rms: 240 EUR / channel

 

 

LinearAmp V.4 Signal Conditioner Amplifiers

 

The prices of the different multi-channel LinearAmp equipments are calculated according to the following algorithm. If the number of the channels in the system is increased according to the powers of 2, the price concerning one channel (the total price divided by the number of the channels) is always reduced by 16 %.

    1-channel equipment: 1000 EUR (1000 EUR / channel)

    2-channel equipment: 1680 EUR (840 EUR / channel)

    4-channel equipment: 2820 EUR (705 EUR / channel)

    8-channel equipment: 4736 EUR (592 EUR / channel)

 

 

Preamplifiers and Accessories for Electrophysiology and for Brain Research

 

The headstages of MultiAmp are listed above at the MultiAmp section.

 

The headstages and preamplifiers of BioAmp are listed above at the BioAmp section.

 

1-channel intracellular preamplifier for (1-channel) BioAmp: 530 EUR

 

1-channel Monopolar (single-ended) preamplifier especially for brain surgery (compatible with the 4-channel BioAmp): 170 EUR

 

Golden-coated electrode plate with two channels of bipolar recording and one bipolar stimulating electrode pairs: 260 EUR

 

1 kVA mains isolation transformer with symmetrical secondary coil, in aluminum enclosure: 850 EUR

 

Single Unit Spike Detector (Level Discriminator): 440 EUR

 

 

BioStim Universal Stimulator System for Biology

 

Please look at the prices on the product description page.

 

 

Mouse and Neonatal Rat Stereotaxic Frame Adaptor

 

Simplified Stereotaxic Frame Adaptor for mice and neonatal rats. Complete equipment, with built-in heating elements and temperature sensor and 4 pieces of height adjustable legs. It is compatible with any stereotaxic frame. Heating pad is implicitly included in the Simplified Stereotaxic Frame Adaptor, because its base plate is heated (compatible with the 12V Physiological - Biological Temperature Controller): 990 EUR

 

Optional accessories:

 

4 pieces of scissor-styled fixing elements to fix the Mouse and Neonatal Rat Stereotaxic Frame Adaptor on any flat base surface: 170 EUR

 

Holder frame to lock the Simplified Stereotaxic Frame Adaptor on a removable and changeable way, without magnetic stands: 370 EUR

 

2 pieces of Cogged Ear Bars: 120 EUR

 

Physiological - Biological Temperature Controller, up to 50 Centigrade (0.1 C resolution): see above at the Temperature Management in Physiology and in Biology section.

 

Parts of the Self-Assembling Kit to build a customized Mouse and Neonatal Rat Stereotaxic Frame Adaptor:

    Nose Holder Rod with teeth clamp, nose clamp and screw: 220 EUR

    2 pieces of Ear Bars in a set: 90 EUR

    Ear Bar Holders (2 pieces) with Open Top: 130 EUR

 

*NOT available at the moment: Original, fine adjustable version of Mouse and Neonatal Rat Stereotaxic Frame Adaptor, with 4 pieces of height adjustable legs (compatible with any stereotaxic frame and compatible with the 12V Physiological - Biological Temperature Controller): 2200 EUR

 

*NOT available at the moment: Holder frame to lock the Simplified Stereotaxic Frame Adaptor on a 2-photon Microscope, with adjustable holder rod system and lockable fixing base (compatible with the Luigs & Neumann patch clamp setups): 630 EUR

 

 

Dual-Superfusion Slice Chamber Insert

 

Plexiglass inserts with stainless steel mesh, in other words complete Dual-Superfusion Slice Chamber Insert, assembled version (drop-in improvement to introduce dual-superfusion surviving method in any compatible brain slice chamber): 95 EUR

 

A pair of Plexiglass inserts, 2 mm thickness, without mesh, for replacement purpose: 20 EUR

 

Stainless steel mesh, without Plexiglass inserts, for replacement purpose: 75 EUR

 

Shipping fee of a small package, such as parts of the Dual-Superfusion Slice Chamber Insert to the European Union countries (incl. insurance): 25 EUR

 

Shipping fee of a small package, such as parts of the Dual-Superfusion Slice Chamber Insert to the United States and the Pacific Area (incl. insurance): 35 EUR

 

If you want to use the Dual-Superfusion Slice Chamber Insert in optimal conditions, the temperature of the two independent solution flows should be controlled. For this purpose we recommend the appropriate products of Supertech Instruments: Dual-channel In-line Solution Heater and Physiological - Biological Temperature Controller, see above.

 

*NOT available at the moment: Custom designed, circle-symmetric plexiglass chamber without the Dual-Superfusion Slice Chamber Insert to fit on any your lab setup. Unit price, independent of the size: 230 EUR

 

 

Pressure Measurement in Biology

 

Biological Pressure Meter, DC-powered version: 420 EUR

 

Plug-in DC Power Supply: 35 EUR

 

Biological Pressure Meter with internal battery charger/conditioner module: 510 EUR

 

Intra-Cranial Pressure (ICP) Monitor: please call or email us.

 

Combitrans sensor, NOT STERILE: 80 EUR

 

 

Force Measurement in Biology

 

Single-channel force meter with 7-segment LCD display and analogue voltage output, DC-powered version: 460 EUR

 

Plug-in DC Power Supply: 35 EUR

 

Pin-style pain stimulator with built-in force sensor, 5N or 15 N full scale (full scale should be specified in the order): 230 EUR

 

Small sized force sensor unit, compatible with the force meter, with sensing lever and holding bar, 15 N full scale: 390 EUR

 

Modified anatomic pinch to apply and measure force stimuli, 30 mm2 applicator surface, 15 N full scale: 190 EUR

 

Piezoelectric force sensor without enclosure, 5 N full scale: 130 EUR

 

Piezoelectric force sensor without enclosure,15 N full scale: 130 EUR

 

 

3D Accelerometer

 

Please look at the prices on the product description page.

 

 

In-vivo and In-utero Electroporator

 

In-vivo and In-utero Electroporator SP-4a, with 200 V or 400 V compliance voltage (compliance voltage should be specified in the order): 1780 EUR

 

Starting Pedal (foot switch) for the In-vivo and In-utero Electroporator: 110 EUR

 

High voltage output cable to the electrode: FREE

 

 

Electrophoretic (Iontophoretic, Ionophoretic) Equipments

 

IonFlow Bipolar with electronic floating power supply: 1200 EUR

 

IonFlow Bipolar with high voltage battery pack: 1200 EUR + price of the Battery Manager (see its price details at the "BioStim universal stimulator system for biology" section.

 

IonFlow Modular: It always contains one compensating current source channel and at least one applicator channel.

- Compensating current source: 600 EUR

- One channel of applicator current source: 1300 EUR

- According to the above prices, de different configurations:

    1 applicator and 1 compensating channel: 1900 EUR

    2 applicator and 1 compensating channel: 3200 EUR

    3 applicator and 1 compensating channel: 4500 EUR

 

IonFlow Pro: 820 EUR

 

Starting Pedal (foot switch) for IonFlow Pro: 110 EUR

 

Multibarrel Ionto Switcher 2 x 8 channel pipette multiplexer equipment with microprocessor-based user interface and completely isolated, relay-switched high voltage output circuits: 1320 EUR

 

Output cable for 8 applicator channels, plus one balance channel, with 14-pin DIP connector headpiece (optional accessory of the Multibarrel Ionto Switcher 2 x 8 channel pipette multiplexer equipment): 135 EUR

 

 

Behavioral Conditioning of Animals

 

Parts of the Modular Behavioral System:

- Power Supply module MBPS-3: 400 EUR

- USB System Controller: 570 EUR

- 4-channel TTL Input control module: 210 EUR

- 4-channel TTL Output control module: 240 EUR

- Sound Generator End-stage module (compatible with sound output of a PC) plus a wideband loudspeaker: 190 EUR

- DC shocker (1-channel, floating, isolated) DCS-4: 700 EUR

- DC Shocker Controller PDC-2 (software compatible with Pulse Pattern Generator of the BioStim Controller V.7): 550 EUR

- Windows-based behavioral control program "Automated Stimulus Control v1.5" and its customized versions are available from

    its developer and intellectual property owner SnowGiraffe Ltd. directly. The annual licence fee of version 1.5 is: 400 EUR

 

AC shocker (1-channel, floating, isolated) SAS-2b: 550 EUR

 

AC Shocker Controller PAC-2 (software compatible with Repetition Cycle and Gate Controller of the BioStim Controller V.7): 450 EUR

 

Touch Detector for Monkey (Touch Button Box, Electronic Control Box and Plug-in DC Power Supply together): 1130 EUR

 

*NOT available at the moment: 4-channel sound and white noise generator: 670 EUR

 

 

Monitor System for Veterinary Use

 

ECG Amplifier. It has an optional right leg drive function. Accessories included: Plug-in DC Power Supply, patient cable with universal clamps. Complete equipment: 370 EUR

 

Respiratory Recorder. Its input is switch selectable to connect either piezoelectric (under the body) or thermistor (in front of the nose) sensor. Accessories included: Plug-in DC Power Supply, piezoelectric sensor with cable, NTC thermistor with cable. Complete equipment: 420 EUR

 

Body Temperature Meter. Accessories included: Plug-in DC Power Supply, Pt100 Transducer Box, Interconnecting cable to the Pt100 Transducer Box, Pt100 temperature sensor with epoxy coating and 0.5 m cable. See the details in the Temperature Management in Physiology and in Biology section. Complete equipment: 385 EUR

 

Pulse Oximeter. It is a microcontroller based precision equipment. Accessories included: Plug-in DC Power Supply, single chip sensor with cable. Complete equipment: 460 EUR

 

Invasive Blood Pressure Meter. Accessories included: Plug-in DC Power Supply, Combitrans sensor NOT STERILE, sensor extension cable. See the details in the Pressure Measurement in Biology section. Complete equipment: 520 EUR

 

 

Perfusion (Pharmacological) Equipments

 

Valve controllers:

- Power end-stage for one valve: 70 EUR

- Equipment case, including power supply (to supply 8 valves as maximum): 370 EUR

- Microprocessor-based timer controller with 2 x 16 character LCD on the front plate: 260 EUR

- An example: the price of a dual-channel valve controller, with a built-in microprocessor timer is: 2 x 70 + 370 + 260 = 770 EUR

- The valves are not parts of the valve controllers, their price is not included in the price of the valve controller.

 

Tail-flick bottle, 50 ml (compatible with the 24V Physiological - Biological Temperature Controller): 420 EUR

 

*NOT available at the moment: DC Stimulator: 2570 EUR

 

 

Precision Mechanical Devices

 

Lockable Magnetic Fixing Stand, 800 N force: 90 EUR

 

Disposable stainless steel head fixing element for mice:

    if you order less than 100 piece: 6.50 EUR / piece

    if you order more than 100 piece: 3.50 EUR / piece

 

Fixed angle (150 degree) holder adaptor to connect the disposable stainless steel head fixing element for mice (prototype): 155 EUR

 

Laboratory rackmount to hold 19 inch wide measuring equipments (180 cm high, 55 (W) x 55 (D) cm, 2 fixed and 5 repositionable shelves): 850 EUR

 

Massive worktable with strong steel leg system and heat resistant surface on the top plate. Its height is 75 cm from the floor. There are built-in leveling screws in the bottom of the legs.

    60 cm deep version: 315 EUR / m2

    90 cm deep version: 475 EUR / m2

    120 cm deep version: 630 EUR / m2

 

 

Design, manufacturing and repairing of special equipments

 

Dual Laser Interlock Splitter equipment: 135 EUR. This product is sold to NIKON Affiliates only.

 

4-channel Laser Interlock Splitter equipment: 255 EUR. This product is sold to NIKON Affiliates only.

 

Unit fee of labor cost for highly qualified experts, such as design engineer, sales director, consultant physicist or biologist, etc. (for one person): 86 EUR / hour

 

Unit fee of labor cost for repair engineer (for one person): 64 EUR / hour

 

Unit fee of labor cost for product specialist at installation (for one person): 64 EUR / hour

 

Unit fee of labor cost for manufacturing (for one worker): 21 EUR / hour

 

Call out fee: we apply this fee on every on-site task, where travel cost is not applied: 80 EUR

 

In the unit fees listed above all expenses of Supertech Instruments are included, except travel cost (if it appears in the concrete case).

 

Traveling fee by our own van: 0.386 EUR / km

 

 

   

PRODUCTS       CONTACT       PRICE LIST       DOWNLOADS       WHO ARE YOU       OUR PROFILE       MUSEUM       HOME